Mercedes-Benz E-Class 2007 Owners Manual - Manual (Page 167)

166
Controls in detail
Control system
Settings menu
In the Settings menu there are two func-
tions:
ț The function To reset: Press reset
button for 3 seconds , with which you
can reset all the settings to the original
factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the Settings menu is seen in the
multifunction display.
The following settings and submenus are
available in the
Settings menu:
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 148) for approxi-
mately 3 seconds.
In the multifunction display you will see
the request to press the reset button
again to confirm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
Function Page
Resetting all settings 166
Submenus in the Settings menu 167
Instrument cluster submenu 169
Time/date submenu 171
Lighting submenu 173
Vehicle submenu 176
Convenience submenu 178
i The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5 seconds, the
Settings menu reappears in the
multifunction display.
For safety reasons, the Headlamp mode func-
tion in the Lighting submenu is not reset while
driving.