Mercedes-Benz E-Class 2007 Owners Manual User Manual
Page 249
248
Controls in detail
Panorama roof with power tilt/sliding panel*
Opening and closing the panorama roof
with power tilt/sliding panel
̈
To open, close, raise, or lower the
tilt/sliding panel, move the roof panel
switch to resistance point in the re-
quired direction of arrows
1 to 4.
Release the roof panel switch when the
tilt/sliding panel has reached the de-
sired position.
Fully opening (Express-open) the pan-
orama roof with power tilt/sliding pan-
el
̈
Move the roof panel switch past the re-
sistance point in direction of arrow
1
and release.
The tilt/sliding panel opens
completely.
Stopping the panorama roof with power
tilt/sliding panel during Express-open
̈
Move the roof panel switch in any di-
rection.
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel must be
synchronized
ț
after the battery has been
disconnected or discharged
ț
after the tilt/sliding panel has been
closed manually (
ț
after a malfunction
ț
if the tilt/sliding panel does not open
smoothly
̈
Remove the fuse from the main fuse
box (
̈
Reinsert the fuse in the main fuse box.
̈
Switch on the ignition (
̈
Move and hold the roof panel switch in
direction of arrow
2 until the roller
sunblinds are fully closed.
̈
Keep holding the roof panel switch in
direction of arrow
2 for approximately
1 second.
̈
Move and hold the roof panel switch in
direction of arrow
1 until the roller
sunblinds are fully opened.
̈
Keep holding the roof panel switch in
direction of arrow
1 for approximately
1 second.
̈
Move and hold the roof panel switch in
direction of arrow
3 until the tilt/slid-
ing panel is fully raised.
̈
Keep holding the roof panel switch in
direction of arrow
3 for approximately
1 second.
̈
Move and hold the roof panel switch in
direction of arrow
2 until the tilt/slid-
ing panel is fully closed.
̈
Keep holding the roof panel switch in
direction of arrow
2 for approximately
1 second.
̈
Check the Express-open feature of the
tilt/sliding panel (
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.