beautypg.com

Mercedes-Benz S-Class 2008 COMAND Manual User Manual

Page 81

background image

80

Safety and Security

Driving safety systems

To maintain the proper distance to the ve-
hicle in front of you and thus prevent a
rear-end collision, you must apply the
brakes yourself.

̈

Immediately brake the vehicle to avoid
a collision.

Under no circumstances should the
driver await the intermittent warning
sound before braking. See the follow-
ing warning note.

The intermittent warning sound ceases
and the distance warning lamp

l

goes out when the necessary distance
to the vehicle ahead is again
established.

PRE-SAFE

®

Brake can react to stationary

obstacles such as standing or parked vehi-
cles at road speeds of up to approximately
40 mph (70 km/h).

̈

Activating and deactivating: Activate
or deactivate PRE-SAFE

®

Brake using

the instrument cluster control system
(

page 303).

After the function has been activated,
indicator

: appears on the

left-hand side of the multifunction dis-
play.

Warning!

G

An intermittent warning sounds and the dis-

tance warning lamp

l in the instrument

cluster is illuminated if PRE-SAFE

®

Brake

calculates that the distance to the vehicle

ahead and your vehicle’s current speed indi-

cate that PRE-SAFE

®

Brake will not be capa-

ble of slowing the vehicle sufficiently to

maintain the preset following distance,

which creates a danger of a collision.

Immediately brake your vehicle to increase

the distance between your vehicle and the

vehicle driving in front of you. The warning

sound is intended as a final caution that you

have not interceded with your own braking

inputs to avoid a potentially dangerous situ-

ation. Do not wait for the operation of the

warning signal to intercede with your own

braking, as that will result in potentially dan-

gerous emergency braking which will not al-

ways result in an impact being avoided.

Tailgating increases the risk of an accident.

Warning!

G

If you do not receive visual or acoustic warn-

ing signals, PRE-SAFE

®

Brake has either not

recognized the collision risk, has been deac-

tivated or is malfunctioning. Apply the

brakes yourself to avoid a collision.