Mercedes-Benz S-Class 2008 COMAND Manual User Manual
Page 306
305
Control systems
Instrument cluster control system
The vehicle status message memory menu
only appears if there are any messages
stored.
̈
Press
( or & to select the
“Service” menu.
If conditions have occurred causing
status messages to be recorded, the
number of messages appears in the
multifunction display: “2 messages”.
̈
Press
% or $ to select the mes-
sage.
̈
Press
# to confirm.
Checking tire inflation pressure
For information about checking tire infla-
tion pressure (
୴
page 593).
Calling up the maintenance service in-
dicator display
For information about calling up the main-
tenance service indicator display
(
୴
page 612).
Checking engine oil level (S 600 and
S 65 AMG)
For information about checking engine oil
level (
୴
page 575).
Settings menu
In the “Settings” menu, you can:
ț
switch the daytime running lamps on or
off (USA only)
ț
switch the additional speedometer on
or off
ț
switch the radar sensors* on or off
(USA only)
Warning!
G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
୴
page 642).
i
See the “Practical hints” section for mal-
function and warning messages (
୴
page 642).
i
If you turn the SmartKey in the starter
switch to position 0 and then back to position 2,
all messages will be deleted from the message
memory.
i
The menu overview can be found on
(
୴
page 289).