Mercedes-Benz S-Class 2008 COMAND Manual - Manual (Page 285)

284
Control systems
COMAND seats
Adjusting sides of seat cushion
This function is used to adjust the air
chambers in the sides of the seat cushion.
̈ Select seat ( ୴ page 282).
̈ Selecting “Seat sides”: Slide o m p or
rotate y m z .
̈ Confirming selection: Press n.
A scale appears.
1 Scale
2 Cursor
3 Current setting
̈ Slide q m r or rotate y m z until desired
setting is reached.
̈ Saving setting: Press n.
Adjusting backrest sides
This function is used to adjust the air
chambers in the backrest sides.
̈ Select seat ( ୴ page 282).
̈ Selecting “Seatback Sides”:
Slide
q m r or rotate y m z .
̈ Confirming selection: Press n.
A scale appears.
̈ Slide q m r or rotate y m z until desired
setting is reached.
̈ Saving setting: Press n.
Adjusting backrest curvature in lumbar
area
This function is used to adjust the air
chambers in the lumbar area of the back-
rest.
̈ Select seat ( ୴ page 282).
̈ Selecting “Lumbar”: Slide o m p or
rotate y m z .
̈ Confirming selection: Press n.
Cross-hairs appear. You can use them
to make two settings:
ț vertical: shift the point of greatest
curvature upward or downward
ț horizontal: adjust the degree of
curvature