Mercedes-Benz S-Class 2008 COMAND Manual User Manual
Page 274
273
Control systems
COMAND automatic climate control
̄
COMAND automatic climate control
You can operate the automatic climate
control via COMAND or via the buttons on
the front and rear* automatic climate con-
trol panel (
୴
page 501).
Some of the special climate control func-
tions can only be set via COMAND.
The following automatic climate control
functions can be operated via COMAND:
i
The components and operating principles of
COMAND can be found on (
୴
page 87).
Warning!
G
When operating the automatic climate con-
trol, the air that enters the passenger com-
partment through the air vents can be very
hot or very cold (depending on the set tem-
perature). This may cause burns or frostbite
to unprotected skin in the immediate area of
the air vents.
Always keep sufficient distance between un-
protected parts of the body and the air
vents. If necessary, use the air distribution
adjustment (
୴
page 275) to direct the air to
air vents in the vehicle interior that are not
in the immediate area of unprotected skin.
Warning!
G
Follow the recommended settings for heat-
ing and cooling given on the following pages
and pages in the “Controls in detail” part
(
୴
page 501) Otherwise the windows could
fog up, impairing visibility and endangering
you and others.
Function
Page
Temperature
274
Air distribution
275
Air volume
275
Switching off cooling (“AC
OFF
”)
276
Central climate control (“Mono”)
277
Footwell temperature
278
Air flow from air vents
279
Rear climate control*
279