Mercedes-Benz S-Class 2008 COMAND Manual - Manual (Page 217)

216
Control systems
COMAND navigation system (entering a destination)
Entering a house number
How the house number is entered depends
on whether you have already entered just
the street or both the street and the town
or city (
୴ page 217).
With only the street entered previously
When COMAND can clearly allocate the
street to a town or city, the house number
appears without input characters. Select a
house number from the list (
୴ page 219).
When COMAND cannot clearly allocate the
street to a town or city, a house number
screen appears. You can now enter a
house number.
1 Numbers entered by the user
2 Input characters
3 Currently selected number
̈ Selecting numbers: Slide o m p or
rotate y m z .
̈ Confirming number selection:
Press
n.
or
̈ Entering a number with the telephone
keypad using the R - 9 buttons
(
୴ page 90).
̈ Deleting individual numbers:
Select
) in the bottom line and
press n.
̈ Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
̈ Canceling an entry: Select “Back” in
the bottom line and press
n.
or
̈ Press back button L in the center
console ( ୴ page 88).
̈ Confirming entry: Select ? in the
second line from the bottom and
press
n.
If COMAND cannot clearly attribute the
house number to a city, the city input
menu appears.
̈ Entering city: Proceed as de-
scribed in the “Entering a city” sec-
tion (
୴ page 208).
After the city has been entered, the
address input menu appears again.
If COMAND can clearly attribute the
house number to a city, the address in-
put menu also appears.
i The house number can only be entered after
the street has been entered.
You can only enter those house numbers which
are saved on the digital map. The digital map
does not contain all house numbers for all
streets.