Mercedes-Benz CL-Class 2008 Owners Manual - Manual (Page 664)

663
Practical hints
What to do if …?
Display Possible cause/consequence Possible solution
Key Not
Detected The SmartKey with KEYLESS-GO* is
momentarily not recognized. ̈ Change the position of the SmartKey with
KEYLESS-GO* in the vehicle.
̈ If necessary, operate vehicle using SmartKey
with KEYLESS-GO* in starter switch under
KEYLESS-GO* button (
୴ page 366).
Key Being
Initialized…
Please Wait The SmartKey with KEYLESS-GO* is be-
ing initialized in the vehicle. ̈ Wait until the message disappears from the
multifunction display.
Remove "START" Button
and Insert Key The KEYLESS-GO* system is
malfunctioning. ̈ Remove KEYLESS-GO* button from the
starter switch (
୴ page 366).
̈ Operate the vehicle with the SmartKey with
KEYLESS-GO* in the starter switch.
Obtain
a New Key The SmartKey with KEYLESS-GO* must
be replaced. ̈ Contact an authorized Mercedes-Benz
Center as soon as possible.
Key Does Not
Belong to Vehicle The SmartKey in the starter switch does
not belong to your vehicle. ̈ Remove the SmartKey from the starter
switch.