Mercedes-Benz CL-Class 2008 Owners Manual - Manual (Page 228)

227
Control systems
COMAND navigation system (Point of interest entry)
Main category list with input characters
When this list appears, the input charac-
ters
5 are automatically activated.
1 Top list entry based on the input data
up to that point
2 Characters entered by the user
3 Characters automatically added by the
system
4 Symbol for available POIs or other
available subcategories
5 Input characters
6 Currently non-selectable characters
7 Currently selectable character
8 Currently selected character
9 Main category list
While the characters are being selected as
described below, the top list entry
1 al-
ways shows the category which best corre-
sponds to the input data as it has been
entered up to that point.
At the same time, COMAND automatically
supplements characters
2 entered by the
user with appropriate characters 3.
̈ Selecting characters: Slide o m p or
rotate y m z .
̈ Confirming character selection:
Press
n.
̈ Deleting individual characters:
Select
) in the bottom line and
press n.
̈ Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
̈ Canceling an entry: Select “Back” in
the bottom line and press
n.
or
̈ Press back button L in the center
console ( ୴ page 84).
As soon as COMAND can clearly attribute
the characters entered to a category, the
input characters
5 disappear.
You see the list of main categories without
the input characters. Here you can confirm
the current entry or make another selec-
tion.
You can also manually switch to the main
category list without input characters at
any time.
̈ Switching manually to the main cat-
egory list without input characters:
Slide
q m.
or
̈ Select ? in the second line from the
bottom and press n.
i In the list of input characters 5, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.