Mercedes-Benz CL-Class 2008 Owners Manual - Manual (Page 217)

216
Control systems
COMAND navigation system (entering a destination)
List of intersections with input
characters
When this list appears, the input charac-
ters
4 are automatically activated.
1 Top list entry based on the input data
up to that point
2 Characters entered by the user
3 Characters automatically added by the
system
4 Input characters
5 Currently non-selectable characters
6 Currently selectable character
7 List of intersections
8 Currently selected character
While the characters are being selected as
described below, the top list entry
1 al-
ways shows the intersection which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters
2 entered by the
user with appropriate characters 3.
̈ Selecting characters: Slide o m p or
rotate y m z .
̈ Confirming character selection:
Press
n.
̈ Deleting individual characters:
Select
) in the bottom line and
press n.
̈ Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
̈ Canceling character entry:
Select “Back” in the bottom line and
press
n.
or
̈ Press back button L in the center
console ( ୴ page 84).
As soon as COMAND can clearly attribute
the characters entered to an intersection,
the input characters
4 disappear. You see
the list of intersections without the input
characters. Here you can confirm the cur-
rent entry or make another selection.
During character entry, you can also man-
ually switch to the list of intersections
without input characters at any time.
̈ Switching manually to the list of in-
tersections without input charac-
ters: Slide
q m.
or
̈ Select ? in the second line from the
bottom and press n.
i In the list of input characters 4, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.