Mercedes-Benz R-Class 2008 Owners Manual User Manual
Page 318

317
Controls in detail
Useful features
Installing
You can install the rear center console in
two different positions. In the most for-
ward position (position 1) you can expand
the cargo compartment fully (
without removing the rear center console.
1 Latch (position 1)
2 Latch (position 0)
3 Rear center console base
4 Anchorage point (position 1)
5 Anchorage point (position 0)
3 Rear center console base
6 Rear center console
̈
Position center console
6 above
base
3.
̈
Insert the tabs at rear of center
console
6 into anchorage points 4
or
5 on base 3.
̈
Guide front of center console
6 down
towards base
3.
Center console
6 must rest on
base
3.
̈
Press down on front of center
console
6 until it audibly engages in
latch
1 or 2.
Warning!
G
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
ț
braking
ț
vehicle maneuvers
ț
an accident
i
The storage compartment and the cup-
holders in the rear center console are only illumi-
nated, when the rear center console is installed
in the most rearward position (position 0).