Mercedes-Benz R-Class 2008 Owners Manual - Manual (Page 143)

142
Controls in detail
Memory function*
Storing positions into memory
̈ Adjust the seat ( ୴ page 44).
̈ On the driver’s side, additionally adjust
the steering wheel (
୴ page 46) and
exterior rear view mirrors ( ୴ page 48)
to the desired positions.
̈ Press memory button M.
̈ Release memory button M and press
stored position button1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledge-
ment signal sounds.
Recalling positions from memory
̈ Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!
Do not operate the power seats using mem-
ory button M if the seat backrest is in an exces-
sively reclined position. Doing so could cause
damage to front or rear seats.
Move seat backrest to an upright position first.
i Releasing the stored position button stops
movement to the stored positions immediately.