Mercedes-Benz R-Class 2008 Owners Manual - Manual (Page 189)

188
Controls in detail
Control system
Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:
ț If the telephone is off, the message
TEL off appears in the multifunction
display.
ț If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network, the message
Ready appears in
the multifunction display.
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the following message or, if available, the
caller ID (name and number):
̈ Press button s.
You have answered the call.
The duration of the call appears in the
multifunction display.
Ending a call or rejecting an incoming
call
̈ Press button t.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until the message TEL appears in the
multifunction display.
̈ Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. The
message
Please wait appears in the
multifunction display.
When the message Please wait
disappears, the phone book has been
loaded.