255 controls in detail – Mercedes-Benz R-Class 2008 Owners Manual User Manual
Page 256
255
Controls in detail
Panorama roof with power tilt/sliding panel*
Fully opening (Express-open) the
panorama roof with tilt/sliding panel
̈
Pull the roof panel switch past the
resistance point in direction of
arrow
1 (
page 254) and release.
The tilt/sliding panel opens com-
pletely.
Stopping the panorama roof with
tilt/sliding panel during Express-open
̈
Move the roof panel switch in any
direction.
The tilt/sliding panel will stop in its
current position.
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel and its roller
sunblinds must be synchronized
ț
after the battery has been
disconnected or discharged
ț
after a malfunction
ț
if the tilt/sliding panel does not open
smoothly
̈
Switch off the ignition (
page 40) and
remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
̈
Switch off the ignition (
̈
Open the driver’s door (this puts
the starter switch in position 0,
same as with the SmartKey
removed from the starter switch).
The driver’s door then can be
closed again.
̈
Remove the fuse for the tilt/sliding
panel from the fuse box (
!
Do not attempt to open or close the
tilt/sliding panel before the tilt/sliding panel is
properly synchronized. The tilt/sliding panel
could otherwise lock-up in the open position.
If the tilt/sliding panel cannot be closed or
synchronized, contact an authorized
Mercedes-Benz Light Truck Center or call
Roadside Assistance (
i
For information on which fuse box contains
the fuse for the power tilt/sliding panel, see the
fuse chart provided with the vehicle tool kit
(
୴୴