Mercedes-Benz R-Class 2008 Owners Manual User Manual
Page 138
137
Controls in detail
Seats
Removing head restraints
Seat position for removal of head restraints
from outboard second-row seats
1 Head restraint
2 Release button
̈
To remove head restraint
1, pull head
restraint
1 to its uppermost position.
̈
Press release button
2 and pull out
head restraint
1.
Installing head restraints
̈
Insert head restraint
1 into openings
on the seat backrest.
̈
Push head restraint
1 down until it
audibly engages.
̈
Push release button
2 and adjust
head restraint
1 to the desired
Armrests
6-seat vehicles
The second-row seat armrests can be
folded up, when loading for example, and
adjusted.
Folding up:
̈
Move the armrest into a vertical
position until it engages.
Adjusting:
̈
With the armrest folded up, disengage
the armrest by pushing it towards the
rear slightly.
̈
Fold the armrest down to the lowest
and then to the desired position until it
engages.
̈
To readjust the armrest to a higher
position, move armrest up to the
desired position until it engages.
i
The head restraint of the second-row middle
seat* and the third-row seat head restraints are
removed in the same manner.
i
On the outboard second-row seats, the
guide bar with the detent must be on the left.
i
The head restraint of the second-row middle
seat* and the third-row seat head restraints are
installed in the same manner.
i
To readjust the armrest to a lower position,
you must first fold up the armrest again and re-
peat the steps above.