Clean the bumpers, Clean the sensors, Maintenance and care – Mercedes-Benz CL-Class 2012 User Manual
Page 420: Care

Cleaning the wiper blades
G
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop button repeatedly until all
indicator lamps in the instrument cluster have
gone out. The windshield wipers could
otherwise move and injure you.
!
Only fold the windshield wipers away from
the windshield when vertical. Otherwise,
you will damage the hood.
!
Do not pull the wiper blade. Otherwise,
the wiper blade could be damaged.
!
Do not clean wiper blades too often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
X
Fold the wiper arms away from the
windshield.
X
Carefully clean the wiper blades with a
damp cloth.
X
Fold the windshield wipers back again
before switching on the ignition.
!
Hold the wiper arm securely when folding
back. The windshield could be damaged if
the wiper arm smacks against it suddenly.
Cleaning the exterior lighting
X
Clean the plastic lenses of the exterior
lights with a wet sponge and a mild cleaning
agent, e.g. Mercedes-Benz car shampoo or
cleaning cloths.
!
Only use cleaning agents or cleaning
cloths which are suitable for plastic light
lenses. Unsuitable cleaning agents or
cleaning cloths could scratch or damage
the plastic light lenses.
Cleaning the sensors
X
Clean sensors : of the driving systems
with water, car shampoo and a soft cloth.
!
When cleaning the sensors with a power
washer, maintain a distance between the
vehicle and the nozzle of the power washer
of at least 11.8 in (30 cm). Information
about the correct distance is available from
the equipment manufacturer.
Cleaning the rear view camera
X
Use clear water and a soft cloth to clean
camera lens :.
!
Do not clean the camera lens and the area
around the rear view camera with a power
washer.
418
Care
Maintenance and care