Setting the temperature, Setting the air distribution, Setting the airflow – Mercedes-Benz CL-Class 2012 User Manual
Page 261: Defrosting the windshield, Sets the temperature, left, Sets the airflow, left, Defrosts the windshield, Sets the airflow, right, Sets the temperature, right, Climate control

Setting the temperature
Climate control climate zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the footwells.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase/reduce: press the w
rocker switch up or down.
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
i
You can also use COMAND to set the
i
The footwell temperature can be set via
Setting the air distribution
Air distribution settings
The air distribution can be set individually for
the driver's and front-passenger sides.
¯
Directs air through the defroster vents
P
Directs air through the center and side
air vents
O
Directs the airflow through the
footwell air vents
S
Directs air through the center, side and
footwell vents
a
Directs air through the defroster and
footwell vents
_
Directs air through the defroster,
center, side and footwell vents
b
Directs air through the defroster,
center and side air vents
W
Sets the air distribution to automatic
The air distribution can be set using COMAND
(
Setting the airflow
You can select different airflow settings for
the driver's and front-passenger sides.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase/reduce: press the K
rocker switch up or down.
You can also use COMAND to set the airflow
(
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
i
You should only select the defrosting
function until the windshield is clear again.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To switch on: press the ¬ rocker
switch up or down.
The indicator lamp in the ¬ rocker
switch lights up.
The climate control system switches to the
following functions:
R
cooling with air dehumidification on
R
high airflow
14
R
high temperature
14
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
14
Depending on the outside temperature.
Operating the climate control system
259
Climate control
Z