Mercedes-Benz CL-Class 2012 - Manual (Page 321)

Display for a slow-moving vehicle (example)
:
Night View Assist Plus display
;
Pedestrian recognized
= Framing
? Symbol for active spotlight function
(example)
A
Speed display
The active spotlight function symbol ?
changes according to the vehicle's speed and
surroundings.
Symbols for the active spotlight function
:
Symbol for stationary vehicle and when
driving on well-lit roads
;
Symbol at speeds above approximately
6 mph (10 km/h)
= Symbol at speeds above approximately
28 mph (45 km/h)
You can read about how to adjust the
brightness of the multifunction display in the
"COMAND" section (
Y page 114).
i The spotlight function only switches on
when the vehicle is driving at speeds of at
least 28 mph (45 km/h). Therefore, when
the vehicle is stationary or moving slowly,
you cannot check whether Night View
Assist Plus with spotlight function is
operating.
When you activate Night View Assist Plus with
spotlight function, speed display A in the
multifunction display changes. Speed display
A is shown as a bar at the bottom edge of
the multifunction display. This line is no
longer available for basic menus. You have to
deactivate Night View Assist Plus with
spotlight function if you wish to change a
setting using the buttons on the multifunction
steering wheel.
X To deactivate the spotlight function
briefly: move the combination switch back
to its normal position.
The spotlight function and the Adaptive
Highbeam Assist are deactivated.
If you push the combination switch forward
beyond the point of resistance again, both
systems are reactivated.
X To deactivate: press button : again.
X Deactivate the Adaptive Highbeam Assist
(
Y page 248).
i If you do not wish to use the spotlight
function, you first need to deactivate Night
View Assist Plus and then activate it again
without the spotlight function
(
Y page 319).
Activating/deactivating Night View
Assist Plus without spotlight function
Driving systems
319
Driving and parking
Z