On-board computer and displays, Display messages – Mercedes-Benz CL-Class 2012 User Manual
Page 370
Display messages
Possible causes/consequences and M Solutions
ABC
Malfunction Stop
Vehicle
The ABC (Active Body Control) vehicle level is too low.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
After a few seconds, the vehicle level is adjusted and the display
message disappears.
The vehicle is leaking oil.
The display message is shown continuously.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X
Notify a qualified specialist workshop or breakdown service.
The display message is shown continuously.
ABC is malfunctioning.
X
Do not drive faster than 50 mph (80 km/h).
X
Make only slight steering movements. Otherwise, the front
fender or the tires could be damaged if the steering movement
is too large.
X
Listen for scraping sounds.
X
Visit a qualified specialist workshop.
ABC
Vehicle Rising
Please Wait Briefly
The ABC vehicle level is too low when the vehicle is stationary.
X
Do not pull away.
The vehicle level is set when the display message disappears.
ABC
Malfunction
The ABC function is restricted. The vehicle's handling
characteristics may be affected.
X
Do not drive faster than 50 mph (80 km/h).
X
Visit a qualified specialist workshop.
HOLD
Off
The HOLD function is deactivated. The vehicle is skidding.
A warning tone also sounds.
X
Reactivate the HOLD function later (
The HOLD function is deactivated. When the brake pedal is firmly
depressed, an activation condition is not fulfilled.
A warning tone also sounds.
X
Check the activation conditions for the HOLD function
(
368
Display messages
On-board computer and displays