Mercedes-Benz CL-Class 2012 - Manual (Page 117)

Avoid using alcoholic thinners, gasoline or
abrasive cleaning agents. These could
damage the display surface. Do not apply
pressure to the display surface when cleaning
it, as this could cause irreversible damage.
Remote control
Overview
You can use the remote control to operate the
COMAND display and SPLITVIEW.
: To switch the screen on/off (SPLITVIEW
only)
;
To switch the button lighting on/off
=
To select the screen for remote control
operation (
COMAND or SPLITVIEW can
be selected)
?
To select a menu or menu item
A
To confirm a selection or setting
B Mute
C To adjust the volume
D
To set the station, skip track, fast
forward/rewind, for example
E To select a station from presets, select a
track, enter directly, enter a phone
number, for example.
F To exit a menu (back)
X Point the remote control at the
corresponding screen and execute the
functions by pressing the corresponding
buttons.
i The remote control's function may be
restricted depending on the angle at which
it is pointed at the respective screen.
Selecting the screen for the remote
control
X Turn thumbwheel = until the desired
display is highlighted in the window.
Switching the button lighting on/off
X Press button ; on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
i If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically.
Mute
X Press button B on the remote control.
The sound is switched on/off.
Adjusting the volume
X Press one of buttons C on the remote
control.
The volume of the currently selected audio
or video source changes.
For COMAND, you can also adjust the
volume for phone calls and navigation
messages.
At a glance
115
COMAND
Z