Can connector – Kontron KBox A-101 Users Guide User Manual
Page 47
12. Standard Interfaces – Pin Assignments
KBox A-101 – User’s Guide (Version 1.00)
12.1.5.
Serial Port (RS422/RS485) configured as RS485 (2-Wire Mode), Half Duplex
Refer to subsection 7.1.4.1 “RS422/RS485 Serial Interface”.
Pin Signalname
9-pin D-SUB Connector (female)
1
Data-
2
NC
3
Data+
4
NC
5
GND (Signal Ground)
6
NC
7
NC
8
NC
9
NC
12.1.6.
CAN Connector
Refer to subsection 7.1.4.2 “DIP-Switch Settings (SW1) for LPCtoCAN Adapter “.
Pin Signalname
9-pin D-SUB Connector (male)
1
NC
2
CANL (galvanisch getrennt)
3
CAN0V (galvanisch getrennt)
4
NC
5
NC
6
NC
7
CANH (galvanisch getrennt)
8
NC
9
NC
Case GND
www.kontron.com
45