Kontron KBox A-101 Users Guide - Manual (Page 20)

7. Product Description KBox A-101 – User’s Guide (preliminary Version 1.00)
7.3. Chassis with Cooling Fins
Three sides of the aluminum chassis (left, upper and right side) are covered with cooling fins. The cooling fins provide heat
dissipation during operation.
Fig. 16: Linke Seite des
Chassis
Fig. 17: Obere Seite des
Chassis
Fig. 18: Rechte Seite des
Chassis
1 Cooling fins of the chassis on the left side
2 Cooling fins of the chassis on the top side
3 Warning sticker “Hot Surface”
4 Cooling fins of the chassis on the right side
To provide sufficient heat dissipation for the cooling of the KBox A-101 platform, never cover the cooling
fins of the chassis. Do not place any objects onto the device.
Please observe the warning label “Hot Surface” (see Fig. 7 and Fig. 17, pos. 3) in the area of the cooling
fins of the chassis. The KBox A-101 chassis may be hot during operation and should not be touched
without taking care. There is a risk of burns.
The material on bottom surface of the enclosure interior where the KBox A-101 is to be mounted, shall
keep at least flammability class UL 94-5VB. Don’t put flammable materials under the device!
1 4 2 3 3
18 www.kontron.com