Kontron KBox A-101 Users Guide - Manual (Page 30)

9. Setting Up the KBox A-101 KBox A-101 – User’s Guide (preliminary Version 1.00)
9.2.3. DIN Rail Mounting Clip
The DIN Rail mounting clip ( Fig. 29 ) allows you to mount the KBox A-101 to a DIN Rail.
The DIN Rail mounting clip make possible to operate the KBox in two operating positions. You may choose
the mounting orientation witch side is facing up or facing down. The DIN Rail mounting clip has to be
mounted to the bottom side of the KBox A-101 corresponding to the desired orientation (refer to
Fig. 30
and Fig. 31 ).
Fig. 29: DIN Rail mounting clip
Fig. 30: Tapped holes at the bottom of the KBox for fixing the DIN Rail mounting clip
Fig. 31: Details of the DIN Rail mounting clip
28 www.kontron.com