Kontron KBox A-101 Users Guide - Manual (Page 21)

7. Product Description KBox A-101 – User’s Guide (Version 1.00)
7.4. Bottom Side
At the bottom side are located: the type label, the inspection status label and if applicable, the license sticker.
Fig. 19: Bottom side (shown as desktop version)
1 Front side with external interfaces of the SBC
2 Rubber feet of the desktop version
3 Countersunk screws M3x8 ISO14581 torx for the
mounting of the internal HDD/SSD drive
4 Countersunk screws M3x8 ISO14581 torx for the
mounting of the bottom part of the chassis and the
brackets for wall/table mounting
5 Threaded holes for mounting the DIN rail mounting
clip
6 Type label
Do not loosen or remove the torx screws of the internal HDD/SSD drive (Fig. 19, pos. 3).
If you intend to convert your device from the desktop version to a wall/table mount version, see also
chapter 9 “Setting Up the KBox A-101”.
4
2 2
2 2
4
5 3 3 5 6
1
www.kontron.com 19