Kontron MSM-LP Manual User Guide V106 - Manual (Page 43)

MSM-LP / BIOS Operation
www.kontron.com 39
-6.0 db emphasis of target link when operating at 5.0 GT/s.
Clock Power Management
Disabled
Enabled If set to ‘Enabled’, the device is permitted to use CLKREQ#
signal for power management of Link clock.
Compliance SOS
Disabled
Enabled If set to ‘Enabled’, this will force LTSSM to send SKP Ordered
Sets between sequences when sending Compliance Pattern
or Modified Compliance Pattern.
Hardware Autonomous W
Disabled
Enabled If set to ‘Enabled’, this will disable the hardware’s ability to
change link width except width size reduction for the
purpose of correcting unstable link operation.
Hardware Autonomous S
Disabled
Enabled If set to ‘Enabled’, this will disable the hardware’s ability to
change link speed except speed rate reduction for the
purpose of correcting unstable link operation.