2introduction, 1 pitx embedded line family, 2 ktt20/pitx overview – Kontron KTT20-pITX User Manual

Page 7

KTD-S0044-G Page

3 Introduction

KTT20/pITX User's Guide

Introduction

2.1

pITX Embedded Line Family

Each pITX is a member of the 2.5" SBC family of KONTRON Technology A/S based on the Pico-ITX

specifi-

cation (only mechanical outer dimensions) from the Small Form Factor Special Interest Group (SFF-SIG).
pITX embedded line modules are characterized by the same front-line pinouts and interfaces for reset logic
and simple power supply, 2 x USB, LAN, Audio, GPIOs, DVI

and LVDS interface. These embedded line family

features allow to use of the same chassis over the whole product line and maximize design reuse.
These homogeneous features facilitate easy upgrades within the pITX embedded line product family.

2.2

KTT20/pITX Overview

Please refer to the following matrix to choose the product that suits your needs best.

Article Number

SDRAM Size

NAND Flash

LVDS Interface

03004-0505-10-0

512 MByte

03004-1005-10-0

1 GByte

This manual is related to the following products:

KTT20