Kontron AT8060 - Manual (Page 28)

13 AT8060
www.kontron.com
2.7.3 SFP
A Powerville quad 1000 Base-T / SerDes controller is installed onboard. Two ports are routed to the RTM and
two are routed to the front panel SFP connectors. The front SFP cages support multi-rate fiber SFP modules.
The SFP interfaces feature the following connectivity:
• front panel with a dual SFP cage
• two connections through the RTM connector
The SFP port has a bi-color green/amber LED with the following signification:
Table 2-1: SFP LED Significations
Signal Path:
The two ports are available on the Base Interface.
BIOS Settings:
Advanced --> Legacy Expansion ROM Configuration -> BI: GE OpROM, Port 1 and 2
Signal Path:
The front panel and on the RTM.
BIOS Settings:
Advanced --> Legacy Expansion ROM Configuration -> FP: GE OpROM, Port 1 and 2 (front panel)->
RTM:
CAUTION LASER LIGHT!
Do not look into the laser beam!
The SFP module is fitted with a class 1 or 1M laser. To avoid possible exposure to
hazardous levels of invisible laser radiation, do not exceed maximum ratings.
LED Signification
Green on Link 1Gbit
Green blink Activity 1Gbit
Amber on Link 10/100Mbit
Amber blink Activity 10/100Mbit