Kontron CP371 - Manual (Page 26)

Introduction CP371
Page 1 - 10 © 2002 PEP Modular Computers GmbH ID 23762, Rev. 02
Table 1-4: CP371 Analog Input Specifications
TYPE DESCRIPTION
Input Types / Ranges VOLTAGES: Single-ended: 0 to 1 5 V
0 to 10 V
Differential: ± 1 5 V
± 10 V
CURRENTS: 0 to 20 mA
4 to 20 mA
Channels Standard: 16 channels total
(two clusters of 8 channels each)
Optional: 8 channels total (one cluster of 8 channels)
Channel Connections Sixteen pairs of dedicated connector pins for plus and minus; sixteen separate
pins for configuring on board shunt resistors for current inputs; twelve ground
pins distributed over the connector
Conversion Continuous serial sampling of input channels, serial multiplexed output of the
ADC; single measurement buffering for each channel in the ADC ProComm
controller
Throughput Rate 13.9 kHz per channel
Resolution 12 bit
Accuracy See table 1-5
Input Filter (edge frequency) 15 kHz for single-ended
20 kHz for differential
Input Protection 8 kV ESD
Over Voltage/Current
Protection Voltage: ± 24 V maximum
Current: 30 mA maximum
Isolation 2 kV process to system
Input Impedance Voltage: 450 k ohm
Current: 250
k ohm