GigaPan EPIC Pro - Manual (Page 38)

35
4.5 Save/Load Config
There are three configuration memories A, B, and C that you can use to save settings. The
configurations may allow you to save a significant amount of time switching between lenses
or cameras.
Saving or Loading a configuration
1. From the EPIC Pro ‘Main Menu’, select the ‘Options’ sub menu and press OK.
2. Select the ‘Save/Load Config’ menu item and press OK.
3. Select one of the configuration memory locations A, B, or C and press OK.
Additional information
Some things to consider before starting a time lapse series:
• If you are mounting the EPIC Pro on a structure or a pole, is it secure? Will it present
a danger to any people in the area if it falls? Safety first.
• How are you going to power the EPIC Pro and the camera body?
• How are you going to store all of the images?
• Is the equipment protected from weather such as rain?
4.6 Last Pic Hold
When the ‘Last Pic Hold’ function is set to ‘ON’, the EPIC Pro will keep the half button press
signal asserted so that the camera is ready for the next panorama. This is very useful for
time lapse panoramas.
1. From the EPIC Pro ‘Main Menu’ select the ‘Options’ submenu and press OK.
2. From the ‘Options’ sub menu select the ‘Expert Options’ submenu and press OK.
3. Select the ‘Last Pic Hold’ menu item and press OK.
4. Select the ‘ON’ and press OK.