GigaPan EPIC Pro - Manual (Page 17)

GigaPan Pro User Guide 14
To charge the battery on its own :
1. To remove the battery from the EPIC Pro , open the battery compartment by flip-
ping the latch counter-clockwise.
2. Plug the connector end of the power cord into the battery and then plug the power
cord into an AC wall socket.
3. Place the battery level in a space that has ample ventilation.
The power cord will show a red steady light indicating the battery is charging.
When the battery is charged, the red light will change to green, signaling the bat-
tery is ready to use.
To check the EPIC Pro battery status:
When the battery is low, a low battery icon will flash in the lower right corner of the
EPIC Pro LCD display. When the battery is so low that proper functionality is no
longer possible, a “Please recharge the battery” message will appear.
To check the battery status, press the directional keys until you reach the ‘Options’
menu item and press OK. Select the ‘Battery Status’ menu item and press OK.
100% means battery is fully charged; a percentage of around 20 % means your
battery will not be able to operate the EPIC Pro much longer.
Charger LED light
Battery Battery Latch
Power cord