Gastroback 40964 Design Food Processor Pro - Manual (Page 6)

• Do not place the appliance or any part of it on or near hot surfaces (e.g. burner, heater or
oven). Do not use any parts or tools of the appliance with any other device or for any other
purpose.
• Before operation, always ensure that the appliance is assembled completely and correctly
according to the instructions in this booklet. Do not use violence.
• Do not insert your fingers or any foreign objects (e.g. clothes, cooking utensils) in the
feed chute, with the appliance connected to the power supply. Do not use any hard, sharp
or edged objects (e.g. knives, forks) with the appliance. Only use the provided pusher for
feeding food into the feed chute. Do not handle the appliance or any part of it with violence.
• Always use only one matching set of tools according to the instructions in this booklet to
avoid damage. Do not process bones, nutshells or any other extremely hard items.
• Do not overfill the bowl. If the maximum filling level is reached, empty the bowl, before
continuing processing your food. When processing liquids, do not fill in more than up to
filling level 500 ml. Otherwise, liquids could run out from under the lid. If liquids run out or
are spilled on the motor base, immediately unplug the appliance.
• Do not leave the appliance unattended, when it is connected to the power supply. Always
switch OFF (ON/OFF button; indicator goes out) at first, then unplug the appliance, and
wait until the motor comes to a standstill, before moving, or cleaning the appliance, or as-
sembling or disassembling any parts, or when the appliance is not in use. Always grasp the
motor base at both sides near the bottom for moving or lifting. Do not hold the appliance at
the bowl, lid, or power cord for moving the appliance. Do not place any hard and/or heavy
objects on the appliance or any part of it. Take care that no one will pull the appliance by
the power cord.
• Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corro-
sive chemicals (e.g. bleach) for cleaning. Do not immerse the motor base or power cord in
water or any other liquid. Do not spill or drip any liquids on the motor base, or on the power
cord to avoid risk of fire and electric shock.
• Do not place the motor base or power cord in an automatic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appliance after each use to
prevent a build up of baked-on foods (see Care and Cleaning). Always keep the appliance
and the tools clean.
Important safeguards for electrical appliances
The appliance is driven electrically. Place the appliance near a suitable wall power socket
to connect the appliance directly to a protected mains power supply with protective conduc-
tor (earth/ground) connected properly. Ensure that the voltage rating of your mains power
supply corresponds to the voltage requirements of the appliance (230 V, 50 Hz, AC, rated
for at least 8 A).
The installation of a residual current operated circuit breaker (r.c.c.b.) with a maximum rated
residual operating current of 30 mA in the supplying electrical circuit is strongly recommen-
ded. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to incompatible
norms. Therefore it is possible that power supplies in foreign countries do not meat the requi-
44