Gastroback 40964 Design Food Processor Pro - Manual (Page 13)

51 51
WARNING: Do not overfill the processing bowl. Possibly, take some food out of the
processing bowl, using a wooden or plastic spoon, before starting the appliance again.
Note: Very stringily food can block the blades. In this case turn the appliance off, wait
for the disc to stop moving and remove the plug from the power outlet. Take off the lid
by turning it counterclockwise. Remove the disc. Rinse the disc thoroughly under running
water and remove food residues. Assemble the appliance and continue to operate.
11. As soon as the food has the right consistency turn the appliance ´OFF`. Always turn
the appliance ´OFF` and pull the plug when the appliance is not in use and you finished
the operation.
12. Empty the bowl. Clean the appliance in accordance to the instructions in chapter „Care
and Cleaning“. Do not leave any food dry on the surfaces of the appliance.
Mini processing bowl and small universal ‘s’ blade
Processing small amount of vegetables, herbs, fish or meat use the
mini processing bowl and the small universal ‘s’ blade.
Act according to the instructions ´Operating with the normal pro-
cessing bowl` including point 3. Take the mini processing bowl and
place it above the spindle inside the processing bowl.
Fit the universal S‘ blade onto the spindle.
Note: You can use the small universal ‘s’ blade only when proces-
sing inside the mini processing bowl. The big universal ‘s’ blade as
well as the discs do not fit into the mini processing bowl.
ATTENTION: Use caution, as blades are sharp. Always handle the
processing blade by its central plastic section.
Fit the universal ‚s‘ blade over the spindle and press firmly into place. Ensure the blade is
securely locked on the spindle. The blade is correct assembled if the central plastic section
faces upwards and flushes with the wider part of the spindle. Only the little metal centre of
the spindle protrudes about 7 mm. The blade is placed a few millimetres above the bottom of
the mini processing bowl. Proceed with step 5 of the instructions „Operating with the normal
processing bowl“.
Note: The mini processing bowl has a lid for storing the processed food. Ensure to take the
blade out of the mini processing bowl before closing the lid and storing the food inside the
bowl.