Gastroback 40964 Design Food Processor Pro - Manual (Page 12)

50
Universal ‘s’ blade
For cutting vegetables, fish or meat, kneading batter or making
shakes, soups or ice cream use the universal ‘s’ blade.
Warning: Use caution, as blades are sharp.
Always handle the processing blade by its central plastic
section.
Fit the universal ‚s‘ blade onto the spindle and press firmly into place. Ensure the blade is
securely locked on the spindle. The blade is correct assembled if the central plastic section
faces upwards and flushes with the wider part of the spindle. The blade is placed a few
millimetres above the bottom of the processing bowl.
5. Position the lid onto the processing bowl. You will notice a solid
grey arrow to the left of the holding lip on the lid, when placing the
lid onto the bowl this arrow needs to align with
the solid grey arrow on the handle of the bowl. To lock, turn the lid
clockwise. The lid has four guiding pins which have to fit into the
cannelure of the processing bowl in order to lock the lid. Turn the lid
clockwise and push up against. The lid is securely locked in position
if the arrow on the handle is facing the line on the lid.
Note: If the processing bowl and cover are not correctly assembled,
the Food Processor will not operate. This is a safety feature.
6. Prepare your food and fill it in the processing bowl. If necessary
cut the food in proper size to fit through the feed chute.
7. Note: For maximum control when using your food processor,
before turning on your food processor load the feed chute and fit the food pusher on top.
WARNING: Do not push products into the feed chute with your fingers or foreign objects.
Always use the food pusher provided. While proceeding do not push the food pusher too
hard down. To refill the feed chute always remove the food pusher first.
8. Connect the power plug to a suitable wall power outlet.
9. Start the appliance pressing the ´ON` button. The motor starts working, the food is
getting processed and gathered at the base of the bowl. While proceeding do not push
the food pusher too hard down to avoid overloading the motor. If the motor stalls or stucks
during operation or if the fibre of the food blocks the blade, immediately turn ´OFF` the
appliance and unplug the power cord. Check whether there is any obstruction in the proces-
sing bowl, and remove it (see „Care and Cleaning“).
ATTENTION: Do not use the appliance in continuous operation for more than 4 minutes
to avoid overheating. If processing large quantities of food, regularly interrupt operation
and unplug the appliance for at least 1 minute, to let the motor cool down.
Important: The Food Processor is fitted with a safety thermal cut-out device and will shut off
in the event of overload. If this occurs, switch the appliance off and it will automatically reset
when cool.
10. You can continue to fill the feed chute as soon as the feed chute is empty.
ATTENTION: Never hold your face or other body parts over the feed chute when the motor
is running because little pieces of food could be thrown out of the feed chute.
cannalure
guiding pins