Gastroback 40964 Design Food Processor Pro User Manual
Page 17
55
55
the Appliance) Additionally, you can store most of the parts and tools within the appliance.
This way, you avoid injuries and damage by the tools and the parts can not get lost.
Place the bowl on the motor base. For storage, it is quite sufficient to lock the bowl only until
it engages firmly on the motor base and will not fall. This way, you avoid excessive wear to
the safety interlocks.
Insert the spindle in the bowl and put the emulsifying disc on it. Insert the small bowl.
Insert the small chopping blade in the designated plastics cover, then insert it in the small
bowl.
Place the lid on the bowl. Again, the lid is already firmly in place without locking the safety
interlock completely. Put the pusher into the feed chute.
3. Unique drawer design enables attachments such as the reversible shredding disc, reversi-
ble grating and shaving disc and the spatula to be stored conveniently within the appliance
when not in use.
Slide out the storage drawer at the base of the food processor.
Place spatula on bottom of storage drawer.
Place the universal blade in the storage drawer.
Place one of the shredding disc in the storage drawer.
Place the grating disc in on top of the shredding disc and close the
drawer.
Carefully push the drawer back into the motor base.
CAUTION: Do not grasp the appliance by the bowl, power cord or lid for moving the appli-
ance. To move the appliance, always grasp the motor base at both sides near the bottom.
4. Grasp the motor base with both hands at its sides, and place it on a suitable surface,
where it can not fall, and is out of reach of young children.
5. Turn the adjusting screw of the variable slicing blade counterclockwise to the stop. This
way, the blade is almost level with the plastic body of the disc, thus reducing the risk of
injuries.
6. It is best to store emulsifying disc, the variable slicing blade, the small blade and the lid of
the small bowl near the appliance.
7. Wind the power cord loosely around the motor base.
Notes for disposal
Dispose of the appliance and packaging must be effected in accordance with the corres-
ponding local regulations and requirements for electrical appliances and packaging. Please
contact your local disposal company.