Gastroback 40964 Design Food Processor Pro - Manual (Page 16)

54
not spill or drip any liquids on the motor base, or on the power cord to avoid risk of fire and
electric shock. Do not use violence!
Dishwasher use
Do not place the motor base or power cord in an automatic dishwasher.
All plastic components deteriorate through prolonged use of a dishwasher for cleaning (e.g.
discolouration, cracks, distortions). Nevertheless, all removable parts and accessories (bowl,
lid, spindle, and tools) of your Food Processor are tolerant to dishwasher use.
However, if using the dishwasher, place the parts only on the top rack. If your dishwasher
features temperature control, do not select more than 65 °C (150 °F). Nevertheless, to ex-
tend the working life of the parts of your Food Processor, it is better to manually clean them
in warm dishwater.
Manual cleaning
1. Clean all removable parts (pusher, lid, tools, spindle, small bowl, spatula, bowl) with
warm dish-water and a soft nylon brush. Doing so, ensure not to get injured by the cutting
tools. Stubborn residues on the surfaces can be removed better by soaking in warm dish-
water for some minutes.
2. Moisture a clean cloth or soft sponge with a little warm dishwater and carefully wipe the
exterior of the appliance and the power cord.
WARNING: Always ensure that the appliance and all parts of it are out of reach of young
children.
3. Thoroughly dry the motor base and all parts, and let dry naturally for about half an hour
out of reach of young children. If liquids dripped on the motor base, then let the appliance
dry for at least 1 day.
Storage
WARNING: Always switch OFF (ON/OFF button indicator goes out), unplug and clean the
appliance and all its parts before storing. (See: Care and Cleaning).
The cutting tools are very sharp. Always ensure that no one can get injured by touching the
blades unintentionally.
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach
of young children. Place the appliance on a clean and stable surface, where it can not fall.
Do not place any hard or heavy objects on the appliance or any part of it.
Always handle the power cord with care. Power cords may never be knotted, twisted, or
squeezed.
Do not use any parts or tools of the appliance for any other purpose than operating the
appliance. It is good advice to store the parts and accessories of the appliance with the
appliance. For this, at least the cutting tools can be stored safely within the appliance or its
accessories.
1. Always switch OFF, unplug, and clean the appliance and its parts before storage. (See:
„Care and Cleaning“)
2. It is good advice to re-assemble the bowl on the motor base for storage. (See: Preparing