Gastroback 42526 Design Multicook Plus - Manual (Page 14)

56
8. After completion of the program an acoustic signal will sound. Depending on the settings of
the appliance, the Keep-Warm-Function will launch (the LED display counts up the time) or the
appliance will return to standby mode.
9.
To cancel the selected program, to interrupt the cooking process or the Keep-Warm-Function
press and hold the ›Cancel / Keep Warm‹-button for a few seconds.
program Fast cook
This program is intended for heating ready meals or for cooking convenience side dishes.
The pre-set cooking time is 15 minutes.The cooking time cannot be changed in this program.
The 24-hour Auto-Start-Function is not available for this program.
1.
Prepare the ingredients according to the recipe. Place these evenly in the inner pot and
insert the inner pot into the housing. Please make sure that all ingredients, including liquids,
are below the maximum mark (10 Cup) on the inner surface of the inner pot. Make sure that
the inner pot is firmly in contact with the heating element.
2.
Close the lid until it clicks into place. Connect the appliance to the power outlet.
3. Press the ›Menu‹-button or the › + ‹ and › – ‹-buttons to select
the program ›Fast Cook‹. Once › Fast Cook‹ flashes on the
LED-display the program is selected. The LED-display shows
the default values for the temperature and cooking time.
4.
Press and hold for a few seconds the ›Start / Keep Warm
on / off‹-button to start the appliance. The ›Start / Keep Warm on / off‹-button lights up and the
countdown of the cooking time is shown in the time indicator.
5.
The Keep-Warm-Function turns on automatically, immediately after the program is over. If
necessary, this function can be switched off by pressing and holding the ›Start / Keep Warm
on / off‹-button at any time.
6.
After completion of the program an acoustic signal will sound. Depending on the settings of
the appliance, the Keep-Warm-Function will launch (the LED display counts up the time) or the
appliance will return to standby mode.
7.
To cancel the selected program, to interrupt the cooking process or the Keep-Warm-Function
press and hold the ›Cancel / Keep Warm‹-button for a few seconds.
program stew
Recommended for stewing vegetables, meat, poultry and seafood. The setting range of the
time is 10 minutes to 12 hours in 5-minute steps.
The 24-hour Auto-Start-Function is available for this program.
1.
Prepare the ingredients according to the recipe. Place these evenly in the inner pot and
insert the inner pot into the housing. Please make sure that all ingredients, including liquids,
are below the maximum mark (10 Cup) on the inner surface of the inner pot. Make sure that
the inner pot is firmly in contact with the heating element.
2.
Close the lid until it clicks into place. Connect the appliance
to the power outlet.
3.
Press the ›Menu‹-button or the › + ‹ and › – ‹-buttons to select
the program ›Stew‹. Once ›Stew‹ flashes on the LED-display