Gastroback 42526 Design Multicook Plus - Manual (Page 10)

52
tecHnicAl speciFicAtions
Model: Art. No. 42526 Design Multicook Plus
Power supply: 220 - 240 V, 50 Hz
Power consumption: 950 W
Length of power cord: ca. 110 cm
Weight:
ca. 4.3 kg
Dimensions: ca. 32 cm x 39,5 cm x 24 cm (width x depth x height)
Capacity: max. 5 Litre
Certification:
BeFore First use
wArning: Do not let young children play with the appliance, or any part
of it, or the packaging!
Remove the appliance and all accessories from the packaging and make sure that all com-
ponents and accessories are included and undamaged. Some of the accessories could be
arranged inside the appliance. Before first use, remove all packaging materials and promo-
tional labels. But do not remove the rating label of the appliance. Make sure especially that
no foreign objects (packing material) are located inside the appliance. Clean the appliance
according to instructions in the section ›Care and Cleaning‹. During the first use of the appli-
ance odours may develop, this is not a malfunction of the appliance. In this case, a thorough
cleaning is recommended.
Place the appliance on a stable, moisture-and heat-resistant work surface. Never operate the
appliance under cabinets, hanging lamps and near sensitive objects to avoid damage caused
by steam, splashes and condensation. Never operate the appliance on inclined surfaces! Do
not move or tilt the appliance during operation. Before turning on the appliance, make sure
that all edges of the inner pot are clean and the lid is securely closed. Do not let liquids run
above or below the appliance. If liquids are spilled onto or into the appliance, turn off the
power immediately and unplug the power cord from the wall outlet. Allow the appliance to
cool and clean the appliance (see ›Care and Cleaning‹).
operAtion
Acoustic signal
Your Design Multicook Plus is equipped with an acoustic signal. This will sound when
keys are pressed or when the cooking process is finished. The signal is always ena-
bled at start-up. You can turn off the signal by holding the ›Hour / Min‹-button for a
few seconds. You will find the acoustic signal indicator in the LED-display. When you
turn off the acoustic signal, the indicator switches off. During the countdown of the Auto-Start-
Function, or if one of the programs is in operation, you cannot turn off or on the acoustic signal.