Canon CR-2 - Manual (Page 39)

6 Maintenance
39
Installing the digital camera
1
Make sure the following check items.
• The power to the retinal camera is off.
• The power plug of the retinal camera is not plugged into an electric outlet.
2
Attach the digital camera to the retinal camera.
1. Align the positions of the mounting alignment marks on the retinal camera and the digital camera.
2. Fit the digital camera's lens mount to the retinal camera's mount.
3. Turn the digital camera clockwise until it clicks.
Mounting alignment mark
3
Attach the DC coupler to the digital camera.
1. Open the battery compartment cover of the digital camera,
and attach the DC coupler.
2. Pass the cord for the DC coupler through the DC coupler
cord hole and then close the battery compartment cover.
4
Open the terminal cover of the digital camera and
attach the cables to the digital terminal and the remote
control terminal.
5
Attach the digital camera cover to the digital camera.
1. Hook the digital camera cover hook onto the strap mount
of the digital camera.
2. Insert the cover screw to secure the digital camera cover.