Canon CR-2 User Manual
Page 10
10
2 Safety
WARNING
Prohibited
Do not plug or unplug the power plug with wet hands
Do not plug or unplug the power plug or handle any other parts with wet hands.
Otherwise, fire or electric shock may result.
Unplug the plug periodically and remove any dust or dirt
around the plug and the AC outlet
If the cord is kept plugged in for a long time in a dusty, humid or sooty place, dust
around the plug will attract moisture, and this may cause insulation failure which
may result in a fire.
Insert the power plug completely
Insert the power plug completely into the AC outlet. If a pin of the power plug makes
contact with metal or any conductive object, fire or electric shock may result.
Prohibited
Do not clean the CR-2 with flammable solvent
Before cleaning the CR-2, for safety reasons, be sure to turn off the power of all the
devices and unplug the power cord from the AC outlet. Do not use alcohol, benzine,
thinner or any other flammable solvent.
Otherwise, fire or electric shock may result.
Turn off the power before inspection
Before inspecting the instrument or cables, for safety reasons, be sure to turn off
the power of all the devices.
Otherwise, it may result in electric shock.
Prohibited
Do not play the supplied CD-ROM in any CD Player
unsupporting data CD-ROMs
Playing the CD-ROM in an audio CD player may damage the speaker. It is also
possible to suffer hearing loss from listening with headphones to the loud sounds of
the CD-ROM on an audio CD player.
CAUTION
Prohibited
Do not install in locations exposed to water, steam, moisture
or dust
Doing so may cause problems or malfunctions.
Prohibited
Do not install in locations exposed to salt, sulfur or corrosive
gas
Doing so may result in corrosion of the instrument, problems or malfunctions.
Prohibited
Do not install in locations that are unstable or exposed to
vibration
The vibration may knock over the instrument or the instrument may lose its balance
and fall, resulting in a malfunction or injury.
Prohibited
Do not place anything near the power plug
To make it easy to unplug the power plug at any time you want, avoid putting any
obstructions near the AC outlet.
The power plug left plugged in an emergency may result in fire or electric shock.
Prohibited
Do not block the vent holes
Doing so may cause the internal temperature to rise and result in fire.