Canon CR-2 - Manual (Page 12)

12
2 Safety
CAUTION
Be sure to turn off the power when not in use
For safety reasons, be sure to turn off the power of all the devices when the CR-2 is
not being used.
Also, unplug the power plug from the AC outlet and put on the cover when the CR-2
is not going to be used for a long time.
Otherwise, dust or any foreign matter may accumulate and result in fire.
CAUTION
Prohibited
Do not touch the main unit and the chin rest while they are
moving
The main unit and the chin rest move to the center position when the CR-2 main
unit is turned on or a study is finished with the control software. Do not touch
the main unit and the chin rest while they are moving. At the same time, keep the
patient’s chin away from the chin rest.
Before packing the CR-2, return the main unit and chin rest to
their initial positions
Lower the main unit and chin rest to the bottom. To automatically lower them, turn
on the power while holding down the set button.
Inspect daily and regularly
Before using the CR-2, for safety reasons, be sure to perform the daily inspection.
Have a regular inspection performed for the CR-2 at least once a year at the
representative designated by Canon.