FBT MPU - Manual (Page 22)

21
° Before using the amplifier make sure that the appliance’s voltage is in accordance to your
mains supply. Connect the amplifier only to grounded mains outlets.
° To avoid the risk of electrical shock never touch the bare conductors leading to the output
terminals of the amplifier when it is in operation.
° The unitmustonlybesuppliedfromthemainsafter all connections have been completed.
°
1)
- The total impedance of the speakers connected must correspond to that selected on the
amplifier’s output terminals
2)
- Each speaker must be equipped with a line transformer with an input voltage equal to that
of the line (70,100V)
°The sum of the power capacities of the speakers must not exceed the output power
capacity of the amplifier
LOW IMPEDANCE LINES
CONSTANT VOLTAGE LINES
TO CONNECT LOUDSPEAKERS USE BOOT’S CABLES EXCLUSIVELY
UK
CONNECTIONS
!