Clearing input text, Text editing – Casio CW-K85 User Manual
Page 38
E
36
Clearing Input Text
Use the following steps to clear text on the input screen.
To clear all text
1.
Press FUNCTION and then BS (CLS).
2.
In response to the confirmation message that appears, press SET.
•
This clears all the text from the input screen.
•
If you want to abort the clear operation without deleting anything, press
ESC in place of SET.
Text Editing
You can set up the label printer so it either inserts new input between existing
characters, or overwrites existing characters with new input. Note the follow-
ing example.
Example
Existing text: ABCDEFGHI
Cursor location: E
New input: XXX
Insert
Result: ABCDXXXEFGHI
Overwrite
Result: ABCDXXXHI
To switch between overwrite and insert
1.
Press SET UP to display the SET UP menu.
2.
Use
and
to select INPUT and then press SET.
3.
On the next screen that appears, use
and
to select INSERT, or
OVERWRITE and then press SET.
•
The CAPS indicator on the display is highlighted when overwrite is turned
on. The CAPS indicator appears normally (unhighlighted) when insert is
turned on.