ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 46)

46 | Operating Protocols
HI-6113 L ASER D ATA I NTERFACE C OMMANDS
HI-6113
Command
Description Probe Response
i Laser data interface
identification string
:i6113
 sr=10-character software
revision
 sn=8-character serial
number
n Read laser current :nx.xxx.
o Laser OFF command :o
The laser and all LEDs except
the green Power LED will turn
off
r Laser ON command :r
The blue Laser LED will
illuminate immediately, then the
yellow Receive LED will
illuminate a few seconds after,
indicating the probe is ready for
operation
The Laser ON command, r, should be the first command sent.
HI-6113
Command
Description Probe Response
tc Read temperature in
Centigrade
:txxxx.
tf Read temperature in
Fahrenheit
:txxxx.