ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 23)

ProbeView Laser Software | 23
5.0 ProbeView Laser Software
The ProbeView  Laser software provides real-time display, logging, and
analysis of Field Probe data. It displays a variety of test information, both
numerically and graphically.
Download and Install ProbeView Laser
See Minimum Computer Requirements on page 10 for the computer
specifications required to install and operate the Laser Data Interface
and Field Probe Measurement System.
1. Go to www.ets-lindgren.com .
2. On the Resources menu, click Software/Firmware.
3. In the Software column, click ProbeView Laser.
4. Save the ProbeView Laser zip file to the desired location.
5. Navigate to the location of the saved ProbeView Laser zip file, and
click to open.
6. Click setup.exe. ProbeView Laser installs in
C:\Program Files\ProbeView.
The first time the HI-6113 is used with the host computer, you may
need to download and install the USB driver. For more information,
see Connect the Hardware on page 17.