ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 29)

ProbeView Laser Software | 29
P ROBE M ENU
Probe Menu Description
Log Data Activates the program to record data from the
probe. Data not saved during a previous logging
session will be lost. Use Log Pause to append
existing data.
Log Pause Pauses probe data logging.
Play Plays previously recorded data. Data must be
reloaded to reply.
Zero Zeros the probe. Make sure that the probe is in a
zero field environment before pressing this
button. This feature cannot be accessed while
data logging is active.
Note: Some probes do not support zeroing.