ETS-Lindgren HI-6113 Laser Data Interface and Probe Measurement System - Manual (Page 44)

44 | Operating Protocols
C OMMANDS
All probe commands return :E7 when the probe is turned off.
Command Description Response
B Read probe converter
voltage
:Bxx.xx
BP Read probe converter
voltage in hexadecimal
format
:B64N
 N=safe operating level
 F=fail level
Voltage reported as 0 –64;
64 corresponds to 100%
The BP command is provided for backward compatibility and should
not be used to monitor the converter voltage, which always responds
with :B64N.
Command Description Response
D3 Read probe data :Dx.xxxyy.yyzzz.zB
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 B=battery flag, N or F
D5 Read probe data :Dx.xxxyy.yyzzz.zcccc.B
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 cccc=composite field value
with floating decimal point
 B=battery flag, N or F