Elecraft P3 SVGA Instructions User Manual

Page 6

Spectrum Display Fill

This setting fills the space below the spectrum line or leaves it open (see Figure 2). It does not have any effect
on the waterfall display or the spectrum display on the P3’s internal screen. In the SVGA sub-menu, turn the

SELECT

knob to

SVGA fill

then tap the

SELECT

knob to toggle the fill on or off.

Figure 2. SVGA Spectrum Display Fill.

SVGA Font Size

In the SVGA sub-menu, turn the

SELECT

knob to

SVGA font

and tap the

SELECT

knob again. Turn the

SELECT

knob to change the font size. Three sizes are available, 0, 1 and 2, shown in the upper left of the

internal P3 display. The change will appear after a brief interval on the SVGA monitor so you can see the effect
of the change without leaving the menu.

SVGA Waterfall Color Bias

In the SVGA sub-menu, turn the

SELECT

knob to

SVGA waterfall color bias

and tap the

SELECT

knob

again. Turn the

SELECT

knob to change the bias value (shown in upper left corner of the P3 internal display).

The change will appear immediately on the SVGA monitor waterfall display so you can see the effect without
leaving the menu.