Parts included – Elecraft P3 SVGA Instructions User Manual

Page 13

Text mode
Original mode

Parts Included

The following parts should be included in your kit. Check to ensure you have them all. If any parts are damaged
or missing, contact Elecraft for replacements (see Customer Service and Support, pg 4).

ILLUSTRATION DESCRIPTION

QTY.

ELECRAFT

PART NO.

P3SVGA Circuit Board Assembly

ESD Sensitive.

1 E850482

Jackscrew Nut, 4-40 (may be mounted on
the Circuit Board Assembly Connector)

2 E700078

Lock Washer, Inside Tooth, #4 (may be
mounted on the Circuit Board Assembly
Connector)

2 E700010

Power cord assembly (used to connect the
P3 directly to a 10 to 15 VDC power supply).
NOTE: Do not attempt to power your P3 from
the K3’s 12V outlet unless it is labeled 1.0A
Max. See Power on pg 5 for details.

1 E850427