EFCO S5600 Outside Glazed - Manual (Page 25)

EFCO CORPORATION 7/2012 PART NO. Y302 Page 25 of 26
Series 5600 Outside Glazed Installation Instructions
Section IX: Exterior Cover Installation
Step #2 Secure Exterior Covers
A.) On vertical covers 1” in depth and over, it is necessary to install a 1/16” X 5/16” roll
pin at the horizontal cover locations to prevent slippage.
B.) On horizontal covers 1” in depth and over, it is necessary to mechanically attach the
cover to the pressure plate similar to what is shown below to insure against
disengagement of cover from pressure plate.
1/16” X 5/16” Roll Pin
1” and up.