EFCO S5600 Outside Glazed - Manual (Page 12)

EFCO CORPORATION 7/2012 PART NO. Y302 Page 12 of 26
Series 5600 Outside Glazed Installation Instructions
Section V: Frame Assembly
Step #2 Optional “Roll – On Horizontal” Components
A.) Refer to the approved shop drawings for job conditions. Install assembled frames
according to the approved shop drawings. The approved shop drawings will also
indicate the location of “Roll – On” horizontal.
Note: Shear block must be leveled
and perpendicular to the vertical.
¼”- #14 X 1 1/2”
HW-SMS 18-8 B
Roll-on horizontal
shear block
“Roll-On” Horizontal
Apply sealant to the
face of the shear block
at each horizontal